Trident Air Dryer
Autodrain
- More than 2 Lakhs Installations
- Designed specially to drain sludge and rust laden condensate
- Reliable all digital electronic circuitry
- ON and OFF timing adjustable
- Power & Drain status indicator
- Extended cycle time upto 32 hrs adjustable
| Item Code | PE076 | PE078 | PE089 | PE095 | PE094 |
|---|---|---|---|---|---|
| Model | EDVX11 | EDVX13 | EDVXHD11 | EDVXHD11-1 | EDVXSS40 |
| Input voltage (AC) |
230 | 230 | 230 | 230 | 230 |
| Average power consumption (watts) | 7 | 7 | 7 | 7 | 7 |
| Min. working pressure (Kg/cm2(g) | 2 | 2 | 4 | 4 | |
| Max. working pressure (Kg/cm2(g) | 16 | 70 | 16 | 16 | 40 |
| Timing Cycle(min) | 1 to 120 | 1 to 120 | 1 to 120 | 1 to 120 | 18 min to 32 hrs |
| Drain (Sec) | 1 to 25 | 1 to 25 | 1 to 25 | 1 to 25 | 1 to 25 |
| Valve orifice (mm) | 1. | 1. | 13. | 25 | 1. |
| End connection inlet | 1/2 BSP(F) | 1/2 BSP(F) | 1/2 BSP(F) | 1 BSP(F) | 1/2 BSP(F) |
| End connection outlet | 1/2 BSP(F) | 1/2 BSP(F) | 1/2 BSP(F) | 1 BSP(F) | 1/2 BSP(F) |
| Environmental Protections | IP 55 | IP 55 | IP 55 | IP 55 | IP 55 |
| Maximum fluid Temperature (Deg C) | 75 | 75 | 75 | 75 | 75 |
| Valve Dimension LAM (mm) | 97x90x146 | 97x90x146 | 101x90x190 | 130x100x240 | 97x90x146 |
| Weight (Kg) | 0.65 | 0.75 | 0.9 | 2. | 0.75 |
| Maximum condenstate discharge quantity at 7Kg/cm2(g) (Liters/hr) | 29 | 29 | 200 | 400 | 29 |
| Air compressor after cooler (m3/hr) | 170 | 170 | 340 to 1700 | 1700 and above | 170 |
| Wet Air receiver (m3) | 1 | 1 | 2 to 5 | 6 and above | 0.5 |
| Prefilter (m3/hr) | 1360 | 1360 | 1700 to 13600 | 15290 and above | 1360 |
| Refrigeration dryer (m3/hr) | 340 | 340 | 3400 | 4250 and above | 340 |
| After filter (m3/hr) | 1360 | 1360 | 1700 to 13600 | 15290 and above | 1360 |
| Dry Air receiver(m3) | 1 | 1 | 2 to 55 | 6 and above | 0.5 |
Coldspeell Dryer
- Large condenser for high ambient temperatures
- Anti-recycle feature for compressor protection
- Low pressure drop across advanced heat exchangers saves energy
- The dryers have been designed for nominal standard inlet conditions as per ISO 7183 - 2007
- Dryer Quality class - ISO 8573 - 1 : 2010 (E) class -5-
| Model | Item Code | Flow in sdrn | Power consumption R134a/R407c | End connection | Dimension (mm) | Weight (kg) | Recommened Pre Alter** 5 Micron | Recommended Post Filter** | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| H | W | D | |||||||||
| 1 Micron | 0.01 Micron | ||||||||||
| Coldspell 20 | PH191 | 20 | 0.32/— | 3/4 BSP | 420 | 400 | 430 | 38 | T100PEA | T100XIA | T100YIA |
| Coldspell 40 | PH192 | 40 | 0.34/— | 1 BSP | 525 | 450 | 475 | 48 | T100PEA | T100XIA | T100YIA |
| Coldspell 50 | PH193 | 50 | 0.36/— | 1 BSP | 525 | 450 | 475 | 48 | T100PEA | T100XIA | T100YIA |
| Coldspell 60 | PH194 | 60 | 0.36/— | 1 BSP | 525 | 450 | 475 | 48 | T100PEA | T100XIA | T100YIA |
| Coldspell 80 | PH195 | 80 | 0.85/— | 1 BSP | 675 | 485 | 525 | 65 | T250PEA | T250XIA | T250YIA |
| Coldspell 100 | PH196 | 100 | 0.85/— | 1 BSP | 675 | 485 | 525 | 65 | T250PEA | T250XIA | T250YIA |
| Coldspell 150 | PH 197 | 150 | 1.02/— | 11/2 BSP | 860 | 670 | 700 | 123 | T250PEA | T250XIA | T250YIA |
| Coldspell 200 | PH198 | 200 | 2.4/1.7 | 11/2 BSP | 860 | 670 | 700 | 129 | T600PEA | T600XIA | T600YIA |
| Coldspell 250 | PH199 | 250 | 2.4/1.7 | 11/2 BSP | 860 | 670 | 700 | 129 | T600PEA | T600XIA | T600YIA |
| Coldspell 300 | PI-1169 | 300 | 2.3/— | 2 BSP | 1275 | 850 | 800 | 240 | T600PEA | T600XIA | T600YIA |
| Coldspell 400 | PI-1170 | 400 | 2.5/— | 2 BSP | 1275 | 850 | 800 | 260 | T851PEA | T851XIA | T851YIA |
| Coldspell 500 | PH171 | 500 | 3.0/— | 2 BSP | 1275 | 850 | 800 | 290 | T851PEA | T851XIA | T851YIA |
| Coldspell 650 | P1-1186 | 650 | —/3.4 | 2NB | 1700 | 1100 | 1425 | 350 | T1210PEA | T1210XIA | T1210YIA |
| Coldspell 800 | P1-1187 | 800 | —/4.4 | 3NB | 1700 | 1100 | 1425 | 490 | T1810PEA | T1810XIA | T1810YIA |
| Coldspell 1000 | P1-1188 | 1000 | —/4.9 | 3 NB | 1700 | 1100 | 1425 | 580 | T1810PEA | T1810XIA | T1810YIA |
| Coldspell 1250 | PH189 | 1250 | —/5.6 | 4 NB | 1700 | 1100 | 1425 | 620 | T2200PEA | T2200XIA | T2200YIA |
| Coldspell 1500 | PI-1190 | 1500 | —/7.9 | 4 NB | 1700 | 1100 | 1425 | 900 | T2600PEA | T2600XIA | T2600YIA |
| Coldspell 2000 | PH203 | 2000 | —/10.5 | 6 NB | 1700 | 1100 | 1450 | 1020 | T3400PEA | T3400XIA | T3400YIA |
Dryspell
- Designed For - ISO:7183-1986 (E)
- Dryer Quality Class - ISO:8573-1:2010 (E) class 2
- Pre-Filter Quality Class - ISO:8573-1:2010 (E) class 1
- Consistent Dew Point performance
- Noise Level < 70 dBA
- Pressure Drop < 0.3 kg/cm2(g)
- Aluminum Construction
- Free From Corrosion & Scale Formation at Inner and Outer sides
- Uses High Crush Strength Adsorbent Materials
| Model | Item Code | Flow scfm ** | End Connection BSP | Dimensions (mm) | Weight Kgs | Recommended Accessories Pre filter Post filter | |||
|---|---|---|---|---|---|---|---|---|---|
| Dryspell Plus 10 | PD237 | 10 | 1/2 | 1038 | 330 | 150 | 21 | T 100 YEA | T 100 XIA |
| Dryspell Plus 20 | PD238 | 20 | 1/2 | 963 | 371 | 213 | 29 | T 100 YEA | T 100 XIA |
| Dryspell Plus 30 | PD239 | 30 | 1/2 | 1227 | 371 | 213 | 39 | T 100 YEA | T 100 XIA |
| Dryspell Plus 45 | PD240 | 45 | 1/2 | 999 | 497 | 313 | 49 | T 100 YEA | T 100 XIA |
| Dryspell Plus 60 | PD241 | 60 | 1 | 1192 | 523 | 313 | 61 | T 250 YEA | T 250 XIA |
| Dryspell Plus 100 | PD242 | 100 | 1 | 1603 | 439 | 372 | 106 | T 250 YIA | T 250 XIA |
| Dryspell Plus 125 | PD243 | 125 | 1 | 1913 | 439 | 372 | 119 | T 250 YIA | T 250 XIA |
| Dryspell Plus 200 | PD244 | 200 | 11/2 | 1615 | 449 | 582 | 214 | T 600 YIA | T 600 XIA |
| Dryspell Plus 250 | PD245 | 250 | 11/2 | 1925 | 449 | 582 | 238 | T 600 YIA | T 600 XIA |
| Dryspell Plus 300 | PD246 | 300 | 2 | 1615 | 457 | 764 | 256 | T 600 YIA | T 600 XIA |
| Dryspell Plus 375 | PD247 | 375 | 2 | 1925 | 457 | 764 | 286 | T 600 YIA | T 600 XIA |
Industries We Serve
Foundry
Textile
Machine Shop
Paper Mill
Chemical
Dairy
Packaging
OEM
Automobile
Fettling
Steel
Safety
Why Choose Us?
We help our customers keep their costs down while improving their performance by providing them with products that will enhance what they do. Therefore, we strive to continually refine and improve what we can offer to them. We ensure that the solution they need is exactly the right fit for their business.
International Presence
We Supply Foundry & Engineering Products more than 15 different Countries
Customized Solutions
We collect & evaluate customers requirement then make a saving plan & then present solution
On-Time Deliveries
On-time deliveries in any part of the world through efficient and modern logistics
Quality & Reliable Service
Clients love us because of our hard work, innovation, commitment to quality and reliable customer service
Finest Products in Industry
Our solutions increase the product life and reduces operational cost We are proud to carry the finest products in the industry
Customer Care
Our customer care team offer 24x7 service through Skype, Phone and Email
Foundry and Engineering Product Range Under One Roof
Clients say about us
Technomet Enterprises is Known for their prompt service and the best quality Products.
Mr. Hemant Mahabal-MD
(Mahabal Metals Pvt. Ltd.)
'Technomet Enterprises' a great business partner that is very professional,efficient and true to its word.Our business relations with 'Technomet Enterprises' for last many years has resulted in various successful projects.
Mr. Bharat Jadav
(Saroj Group)
We are in business with Technomet Enterprises since last six years. They always fulfilled our requirements and kept their commitments with respect to time and quality. Thank you Team Technomet Enterprises!!
Mr. J Shridhar-Sourcing Department
(Hinduja Foundries Ltd.)
