Directional Control Valves
- Sizes:1/8,1/4 & 1/2 4 3/2, 5/2, 5/3 type available
- Available for different standard coil voltages
- Manifold mounting is possible
- Solenoid J Series Valves
- Sizes 1/4' and 1/2'
- 3/2 Way Normally opened, 3/2 Normally Closed & 5/2 type available
- 22 mm & 32 mm coils available
- 3/2 NO / NC & 5/2 versions
- Suitable for 10 bar air pressure
- Basic, Roller lever, Finger lever and Foot operated type available
- Solenoid valves J series
- Solenoid valves DP1 series
- 3/2 Direct acting NC valves -
17mm - 3/2 Direct acting NC valves - 22mm
- Panel Mounting Valve - G1/8
- Spool Design
- Mounting provision for individual unit
- Panel Mounting Valve- M5
- Poppet design
- Mounting provision for individual unit
- 3/2, 5/2, 5/3 valves
- Suitable for 8 bar - G1/8,10 bar - G1/4, G1/2 air pressure
- Mounting provision for individual unit
- Suitable for panel mounting
Directional Control Valves NPT
- Sizes: NPT 1/8,1/4 & 1/2 4 3/2, 5/2, 5/3 type available
- Available for different standard coil voltages
- Manifold mounting is possible
- 3/2, 5/2, 5/3 valves
- Suitable for 8 bar - 01/8,10 bar - 01/4, 01/2 air pressure
- Mounting provision for individual unit
- Suitable for panel mounting
Air Preparation Units
- Modular Construction
- FRL Clamps
- Pressure Gauges
- Panel Mounting Pressure Gauges
- Auto Drain Valve
- FRC with Manual Drain
- FRC with Internal Autodrain
- FRC with Metalbowl
- Sizes: G1/4, G3/8, G1/2, G3/4, 01
- Filter Regulator Combination Lubricator with Modular
- FRCLM without Piping Adopter
- Sizes: G1/4, 03/8, 01/2, 03/4, 01
- Filter with Manual Drain
- Filter with Internal Autodrain
- Filter with Metal bowl
- Mist Separator
- Sizes: G1/4, 03/8, 01/2, 03/4, 01
- Sizes: G1/4, 03/8, 01/2, G3/4, 01
- Regulator
- Regulator with NRV
- Sizes: 01/4, 03/8, 01/2, 03/4, 01
- Lubricator
- Lubricator with Metalbowl
- Filter, Regulator, Lubricator with Modular
- FRLM without Piping Adopter
- Sizes: G1/4, G3/8, G1/2, G3/4, G1
Air Line Valves
Air Cylinders
Tubes Accessories
- Air Blow Gun
- Nipples
- Junction Box
- Silencer
- Quick Coupler
- Colored polyurethane Tubes
- Nylon Tubes
- Polyurethane Coiled Tubes
- Tube Cutter
Didactic
Educational
- Modular Production System
- Janatics Trainer Kit
- Janatics animation software for Pneumatics
- Wall posters
- Cut Section of Pneumatics
One Touch Fittings
Jindal Piping
Advantages
- Long Working Life
- Low Thermal Conductivity
- Low Thermal linear expansion
- Cleaner Air due to corrosion free surface
- Better flow rate
- Compact Piping system
- Bendable without springing back
- Lower labour cost
- Minimum Fittings
Installation
- Pipes and fittings are supplied ready for installation
- No in-depth training required
- No need to weld, glue, fuse or thread
- Time Saving
- Easy to install, handle and Transport
- Light Weight
- Pipes do not require painting
- Can be modified or expanded without the need for Specialized Equipment
Frequently Asked Questions
What is MLC Pipe ?
Jindal MLC means multi layer composite pipe. There are three layers which are polyelythene , aluminum and polyelythene.
Application of these Pipe ?
These pipes are mainly used for compressed air and hot water.
What is pressure operating of these Pipe ?
Jindal MLC pipes are tested at 16 bar pressure. Operating pressure of these pipes in 10 bar.
Warranty of these Pipes ?
Company offers 10 years warranty for pipes and fittings.
What is jointing method of these pipes ?
Ferrule type fittings are used which has combination of O rings, Split ring and lock nut.
Do you provide installation service ?
Yes. We have team of qualified people for installation.
At which locations you can provide services ?
We have our office at Pune, Kolhapur, Sangali, Belguam. Through these offices we can provide services across Maharashtra.
Till date how much piping you have done ?
We have done more 1 laces feet’s piping across Maharashtra.
What are standard sizes available for Pipe ?
½” (1216), ¾” (1620), 1” (2025), 1.25” (2532), 1.5” (3240) & 2” (4050).
Air and Spray Guns
The way an air compressor spray gun works will depend on the type of spray gun but will use similar principals. There are three main types of ways to feed a spray gun pressure, gravity, and suction. Each will use air injected into a coating to break it apart (atomize it) which is responsible for the quality of the finish you achieve. The primary difference is how material is provided to the gun so that the air can be injected. For example a gravity gun uses a cup on top and when you pull the spray gun trigger the needle pulls back allowing the paint to flow due to gravity.
Compressor
Industries We Serve
Foundry
Textile
Machine Shop
Paper Mill
Chemical
Dairy
Packaging
OEM
Automobile
Fettling
Steel
Safety
Why Choose Us?
We help our customers keep their costs down while improving their performance by providing them with products that will enhance what they do. Therefore, we strive to continually refine and improve what we can offer to them. We ensure that the solution they need is exactly the right fit for their business.
International Presence
We Supply Foundry & Engineering Products more than 15 different Countries
Customized Solutions
We collect & evaluate customers requirement then make a saving plan & then present solution
On-Time Deliveries
On-time deliveries in any part of the world through efficient and modern logistics
Quality & Reliable Service
Clients love us because of our hard work, innovation, commitment to quality and reliable customer service
Finest Products in Industry
Our solutions increase the product life and reduces operational cost We are proud to carry the finest products in the industry
Customer Care
Our customer care team offer 24x7 service through Skype, Phone and Email
Foundry and Engineering Product Range Under One Roof
Clients say about us
Technomet Enterprises is Known for their prompt service and the best quality Products.
Mr. Hemant Mahabal-MD
(Mahabal Metals Pvt. Ltd.)
'Technomet Enterprises' a great business partner that is very professional,efficient and true to its word.Our business relations with 'Technomet Enterprises' for last many years has resulted in various successful projects.
Mr. Bharat Jadav
(Saroj Group)
We are in business with Technomet Enterprises since last six years. They always fulfilled our requirements and kept their commitments with respect to time and quality. Thank you Team Technomet Enterprises!!
Mr. J Shridhar-Sourcing Department
(Hinduja Foundries Ltd.)
